300B SE Amp: 46 Driver (Part I)

And time arrived to start experimenting with the different drivers. Why? Well, the whole point of the latest modular design is that I can easily (I hope) make quick changes and experiment.

The D3a driver board can be replaced with a new one. In fact I will be building a pair of stacked boards (which are in essence ground planes) to hold the SUT as well as a pentode screen bias regulator and the driver board.

First incarnation will be on the 46 DHT. However, drilled the board to fit either loctal (e.g. 4P1L, C3g, etc.) as well as noval for other 9-pin drivers I have in mind.

46 driver in progress

The build process is fast. I have the ground plane PCBs, which I drill (M3) to fit multiple plastic hex standoff to hold either PCBs or different turret/2mm connectors to plug in/out the board as needed. This LEGO-like approach is amazing, very happy with the flexibility and speed of work I can get with this.

Stay tuned.

300B SE Amp: build part IX (Layout)

Feedback was that more pictures were preferred. So here they are. I have little time, but slowly I will make progress I hope. The main chopping board is what is left now. Layout is tricky as have not enough space given the size of the OPTs 😀

D3a driver w/ Rev08 board

A friend from Canada ordered a pair of boards and I used the opportunity to test the newly arrived hybrid mu-follower (aka as gyrator) Rev08 PCBs.  He will be using these boards in the 300B design posted here.

Continue reading “D3a driver w/ Rev08 board”