LCR Phono: design notes (Part III)

My previous design wasn’t good for two reasons:
  1. Input capacitance was too high due to Miller effect.
  2. Overall gain wasn’t enough: 55dB was marginal as 60dB would be ideal for an MC stage. Obviously this doesn’t apply to an MM cartridge where 40dB should be more than ok.

Continue reading “LCR Phono: design notes (Part III)”

LCR Phono: design notes (Part II)

Introduction

This is a continuation of my previous blog post. I will try to share my experience through the design process of this RIAA stage through these individual posts with an attempt to spark some interest in others and in return to get some valuable input from the experience and knowledge of others. Hope this works!

First stage

LCR-phono-test5
Here is the initial design version for analysis. I’m working through this step by step and refining the circuit in every iteration. The initial circuit is very simple. The first stage is key. We want to achieve as much amplification as possible from this stage before we hit the LCR network. The choice of the 6S17K-V valve may appear as a surprise to the ones not familiarised with this valve.  Here are some notes from Wavebourn around this valve:

Continue reading “LCR Phono: design notes (Part II)”