Detecting those little creatures from the bottom
When recently measured the performance of my CCS designs, I found that I wasn’t able to measure below -114dBV (2uV) and therefore limited my ability to measure CCS impedance. I was also keen to measure inductors, transformers and other reactive components to derive 2 or 3 component models for more accurate simulations during the design process. A preamplifier was in order, so I looked at options with some of the ICs I had at hand. A very nice suggestion from Burr Brown/Texas Instruments is shown below. The INA106 is a precision 10x differential amplifier. Not a cheap device, but quality does comes with it unfortunately. When coupled with a pair of OPA37, a very accurate differential preamplifier can be built with extremely low noise and distortion: