FET RIAA Phono Stage
Finally completed today. It seems impossible from me to get a project finally boxed properly. I’ve done it this time with the RIAA phono stage built recently thanks to the help and guidance from Rod Coleman. This MC stage has a gain of about 70dB for MC cartridges and currently running my DL103a with a 200Ω input load. The beauty of the folded cascode (or shunt cascode as Rod refers it to) is that Miller capacitance is not a problem thanks to the fixed voltage at the drain of the FET input stage. This helps us to have a low input capacitance stage. The second stage is op amp OPA637.
I need to take final measurements of this Phono stage but this is how it looked when I was initially testing it on the bench:
Nice RIAA compliance to +/- 0.1dB. LF noise and gain levels made it difficult to capture the LF response below 100Hz.
The distortion is also really nice with less than 0.025% @ 1kHz and nice harmonic distribution thanks to the CCS at the output which is forcing the operational amplifier to operate in class A:
This stage was well received at the recent London Audio Circle Meeting. It has a nice clean and detail sound. I tried it with multiple MC and even low MM cartridges and has a nice response across the whole bandwidth. Great bass and delicate treble.
I think it is a very quiet phono stage given its high gain. I really like the overall sound and response and I guess that the negative side of it is the 18V battery pack made up of PP3 rechargeable batteries. It needs charge every two weeks and may be a pain in the back. I will try a DC supply, but will have to be really quiet to substitute my battery pack.
Ale
Can you please provide a schematic.
Please, please, please !!!
Schematics please !!!!! : )