Having fixed the bias offset problem in my tester (actually my oscilloscope). I took again the curves this evening to get a better model….
If you want to read how did I manage to get here, please read this post
6e5p triode strapped curves (offset fixed so grid voltages are fine now!)
Related
Author: Ale Moglia
"A mistake is always forgivable, rarely excusable and always unacceptable. " (Robert Fripp)
View all posts by Ale Moglia
One thought on “Updated 6e5P SPICE model”
Hi Ale,
It seems you have had some difficulty getting the 6E5P Triode trace sorted to being correct.
As I am considering using 6E5P Triode into LL1660/18mA Alt Q, 4.5:1 stepdown, as the line output stage of Allen Wright’s FVP5A/SVP1 preamp, I am especially hopeful to know…if the last trace above can be considered to be *definitive*?
If so, good, even perfick! If not, I am at sea with many unknowns…and may have to just try it and see, with the fall-back position of using Sylvania GB 5687 for line out with the same transformer.
Hi Ale,
It seems you have had some difficulty getting the 6E5P Triode trace sorted to being correct.
As I am considering using 6E5P Triode into LL1660/18mA Alt Q, 4.5:1 stepdown, as the line output stage of Allen Wright’s FVP5A/SVP1 preamp, I am especially hopeful to know…if the last trace above can be considered to be *definitive*?
If so, good, even perfick! If not, I am at sea with many unknowns…and may have to just try it and see, with the fall-back position of using Sylvania GB 5687 for line out with the same transformer.
Your help/confirmation would be much appreciated.
Very Best,
Robert