Diode cathode bias

 

Playing with the semiconductor curve tracer I did a quick test of potential candidates for diode cathode bias:
Diode Bias Examples

 

The popular HLMP-6000 is a superb LED with its low impedance. The SiC diodes have proved to be a great match with an impedance lower than 2Ω. Bias voltages will be around 0.7-0.8V for low currents. The classic Schottky SB540 has a very low impedance, but its forward voltage is so low that is not practical for diode cathode bias. What surprised me was to see the 1N4007 to be a good match. The impedance is higher than the LEDs or SiCs, but good enough. The green LED on the opposite extent has a significant dynamic resistance over 10Ω.

Interesting to see that a minimum of 2mA should be run through with small signals to ensure the diode operates in the linear region. The higher the better. An arrangement with an extra source of diode current (e.g. LND150 or DN2540 CCS shunting current to the diode) can be used when dealing with lower cathode currents due to the valve being used.

Further tests are required….