HY1269 curves

HY1269 I’m a big fan of the thoriated-tungsten filaments and I value them not just because they do look very cool, but fundamentally due to how they sound in a single-ended stage. I hope to build a nice push-pull amp with these type of valves soon.

I found a pair of HY1269 valves recently. This valve is not well-known amongst the used ones out there but they do have some interesting characteristics as a directly heated tetrode that would be interesting to consider it for a plate-to-grid (Schade) feedback configuration.  With its 30W of anode dissipation capability, it’s a good candidate for an output stage. However, it’s quite likely that you will have to drive it in A2 to get the most out of this valve. Like designs using 811a and similar transmitting valves, the HY1269 can be operated in class A2 even with no signal on the grid.

As per my “Robustiano” design using the 6P21S, it would be nice to see extracting 6W or more out of this  transmitting valve. I’m sure that the thoriated-tungsten touch will provide a lovely sound if properly implemented.

Continue reading “HY1269 curves”