814 SE Amp: upgrading the gyrator loads

IMG_1811

The upgrade made to the 814 SE was quite simple, I replaced the gyrator carbon 4M7 for a Holco one and the mu resistor for a Mills 820R MRA05 5W. The capacitor was finally reduced from the outrageous 1uF Mundorf Mcap EVO Oil Gold to an 220nF 450Vdc Mundorf Mcap EVO Silver Oil.

The main change was the capacitor and proved to have no loss impact on the bass. I have recently made the OT change so cannot comment on the overall impact in the sound of these changes. I can say at this stage that I cannot notice any big change. It sounds as good as before!

IMG_0366.JPG

I’d have expected a noticeable change by reducing the size of the cap, but in this case I didn’t.